Friday, July 12, 2013

LWD Design Team Showcase: Sizzix Tim Holtz Alterations Vintage Cabinet Dies

Today I'm showcasing my first project for the Lone Wolf Designs DT.  I've posted other step-by-step projects before but with this one, I'll give you the products and SKUs I've used.  This will make it easy for you to find them if you are a member of the LWD Discount Retail Sales group.  (and if you're not, you're paying too much for your craft supplies!)

While I use my SCAL/electronic cutter on just about all my projects, sometimes there is no other way to do something but to use my Big Shot.  This is always the case when using Grungeboard,  the Cricut just cannot cut it.  And since I wanted a piece that could stand, I wanted Grungeboard.  This piece also used up scrap paper from a cruise scrapbook...nothing goes to waste in my studio!

PROJECT INSTRUCTIONS:
1.  First cut the middle pieces out of Grungeboard.  I used two Sizzix Tim Holtz Alterations Movers and Shapers dies--the mini and  the vintage cabinet card.  First I cut one whole large cabinet card.  Then I placed the mini cabinet card inside of it to get the frame.  
Dies apart and together
Next I cut the designer paper the same way and glued it to the front of the frame with Glossy Accents.  Next, I cut and attached the photo to the back of the frame.  I could have cut the photo using the die, but since I wanted to adhere it to the back of the frame, I hand cut it smaller.  Then I attached the frame/photo to the larger cabinet card with GA and let dry.  I used bulldog clips all around the frame to make sure it attached securely.  If you wanted to skip this step, you could eliminate the frame and just cut the photo using the mini cabinet card.  I liked the dimension having the Grungeboard frame gave the piece. 
2.  Cut two large whole cabinet cards from Grungeboard and coordinating designer paper.  Again attach with Glossy accents and let dry.
 
3.  Choose three colors of Distress Inks to coordinate with your paper.  I used Walnut Stain, Rusty Hinge and Spiced Marmalade.  With an ink blending tool,  I laid them on the craft mat and distressed around all the edges.  Make sure to pull all three colors into each piece of the triptych.  Then I used Walnut Stain Distress Stain to color the edges and the backs.  Let thoroughly dry.
 
4.  Choose and add your embellishments with Glossy Accents.  I used nautical premade die cuts left over from my scrapbooking project.  I also die cut two Spellbinder ribbon banners which I distressed with DI and added rub on letters to.  Finally, punch holes in the inside edges (I used a Cinch) and tie twine to hold the pieces together.
I hoped you enjoyed this little project!  You can find the products I used below plus many more for your crafting projects at 25% Off MSRP at Lone Wolf Designs, LLC.  All you have to do is join the LWD Discount Retail Sales Facebook group.  If you haven't joined us yet, you're paying too much for your craft supplies!
Supply List 
(LWD Product Performers SKUs in red):
  • Paper & Premade Diecuts:  K & Company Tim Coffey Travel
  • Rub On Letters:  Fancy Pants
  • Sizzix - Tim Holtz Alterations - Movers and Shapers Magnetic Die - Mini Cabinet Card--SXTH657206
  • Sizzix - Tim Holtz Alterations - Movers and Shapers Magnetic Die - Vintage Cabinet Card--SXTH657217
  • Advantus - Tim Holtz - Ideaology - Grungeboard - Basics Plain--VTH92715
  • Spellbinders - Shapeabilities Ribbon Banners--SRS4324
  • Ranger - Glossy Accents Ranger - Glossy Accents--DPGAC17042
  • Ranger - Distress Pads by Tim Holtz Rusty Hinge--THTIM27157
  • Ranger - Distress Pads by Tim Holtz Ranger - Distress Ink - Walnut Stain--THTIM19534
  • Ranger - Distress Pads by Tim Holtz Spiced Marmalade--THTIM21506
  • Ranger- Distress Stains-Walnut Stain--THTDW29908
  • Sizzix - Big Shot Machine--SX657900
  • Ranger - Non-stick Craft Sheet LARGE Ranger - Craft Sheet--RINSC20677
  • Ranger - InkBlending Tool Handle and Replacement Foam Ranger - Ink Blending Tool-RIIBT23616
Entered into these challenges:
RHEDD & ROSIE---HERE COMES SUMMER
4 CRAFTY CHICKS--3D PROJECT


11 comments:

G-ma said...

Cindy I love your Vintage Cabinet frame project. You created a great project here.

Moira Gray said...

Fabulous make, love the colours.

Thank you for joining in our challenge at Rhedd & Rosie Challenge Blog.

Moira DT.

Lone Wolf Designs said...

Thank you for the beautiful project, Cindy! You did an awesome job! So happy to have you on the team!

Donna said...

Beautiful job! I love that die and yet I have not gotten it yet!
Thank you for sharing!
Donna/memesartplace
ATT

DeAnna Goen said...

Such a cute photo display. :) Glad to have you as a part of the team!

Leanne said...

Thanks for playing our 3D challenge at 4 Crafty Chicks, nicely done!

Leanne DT!
4 Crafty Chicks

Zoe said...

Pretty colours, thanks for joining in Rhedd and Rosie's challenge, good luck Hun, Zoe DT xx

mamablitger said...

Oh my.......LOVE this amazing vintage photo frame. It is amazing. Love all about it.
Thank you so much for sharing your creativity with us. I feel truly inspired to get out these dies and create something nice, fun or even pretty....
Hugs from SPAIN

Jen said...

Awesome frame Cindy! Nothing goes to waste over here, either. :) LOL!

Lori said...

Gorgeous picture frame! Thanks for joining us at 4 Crafty Chicks this week :)

Melissa Latchem said...

Thanks for entering the Rhedd and Rosie's Challenge and good luck! Melissa (DT) xxx